|
Page 1 of 2 Climasystem Heating and Cooling
 Room Heating and Cooling
An individual´s comfort and efficiency directly depend on the basic environmental conditions of his surroundings. Working efficiency varies according to temperature with every cooling or heating degree. If a room is too hot, too cold, too drafty or too noisy, it can result in decreased productivity and comfort. Aquatherm's climasystem is uses radiant heating and cooling to provide quiet, draft-free climate control at a consistant and ideal temperature.
Radiant heating and cooling is very efficient and can used completely independantly of the ventillation system. Climasystem is uniquely engineered to provide both heating and cooling using the same system and can go from being off to having a noticable effect on the room in as little as four minutes.
How the system works
 Climasystem is designed to fit under the drywall or any other interior-finished surface. Construction thickness including manifolds, mounting with the aquatherm-climasystemrail and connections amounts to only 24.5 mm or 1 inch. The pipe grids have rectangular manifolds, which can be interlinked. This allows for an easy design and installation using the reverse return principle.
The water volume for the required thermal output is distributed via square pipes (12 mm/25m pipe per m2) within the grids. Climasystem's polypropylene composition helps minimize both velocity of flow and the pressure drop. Velocity of flow for a surface area of approx. 10 m2 is below 0.3 m/s.
When used in suspended ceilings, aquatherm's climasystem can be installed in tile size modules. It can also be installed in dry construction behind gypsum wall board, or in wet construction, embedded in wall and covered with plaster. Climasystem wall panels are designed to fit neatly between the framing studs.
|
